أداة التثبيت DH-Robotics ذراع DH-3 الكهربائي التكيفي من DH Robotics مع موصل - ديلي لـ روبوت صناعي

Payload: 1800 g
DH-3 is an advanced three-finger gripper designed with precision and affordability in mind. In developing the DH-3, DH Robotics sought to address two of the main problems with adaptive three-finger grippers: their high cost and their relative difficulty in operation
Stroke: 106 mm (parallel); 122 mm (centric)
Communication standard: Modbus RTU (RS485) Digital I/O interface
Optional: TCP/IP, USB 2.0, CAN2.0A, PROFINET, EtherCAT
Opening/closing time: 0.7 s / 0.7 s
Recommended operating environment: 0–40 °C
Nettogewicht: 1680 g
DH Robotics DH-3 Adaptive Electric Gripper with Connector - with Brake
With a stroke of 106 mm and a recommended payload of 1.6 kg
the DH Robotics DH-3 offers a robust and easy-to-use three-finger gripping solution. This advanced gripper offers a wide range of possible grips
a self-locking system in the event of a power failure
and impressive precision and control. Intuitive to use and easy to set up
the DH Robotics offers plug-ins for Universal Robots
OMRON
and more. The DH-3 is ideal for demanding manufacturing areas as well as laboratory and research environments
Characteristics
The
DH Robotics
With this in mind
DH Robotics developed the DH-3 with an integrated drive controller and communication system. These critical systems are located inside the DH-3
and the cable is simply connected to the robot or the control cabinet. The DH-3 was also designed with safety in mind. For example
the gripper automatically locks in the event of a power failure. Since the gripper does not release the workpiece in the event of a power failure
safety is significantly increased. This also prevents potential damage to the workpiece
With the DH-3
you're in control. This gripper offers superior flexibility
allowing you to easily adjust the gripping position
force
and speed. Furthermore
the DH-3 offers intelligent feedback. For example
the gripper can detect both gripping and dropping. The user can also monitor the position of the gripper elements and the gripping status in real time
enabling better problem detection and troubleshooting
Setting up the DH-3 is easy. DH Robotics offers plug-ins for a variety of cobot brands
including Universal Robots
OMRON TM
Hanwha
AUBO
and more
Maintenance and adjustment are also particular strengths of the DH-3. The fingertips of the gripper elements can be easily replaced by the user
Additional technical information
The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper VAT invoice
Delivery time 5-10 working days!