آلة قياس الإحداثيات Zeiss Contura 7/10/6 RDS

This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine.
Location: RO
Maximum workpiece size: approx. 1344 x 910 x 716 mm
Maximum workpiece weight: 730 kg
Table height: 850 mm
Articulating head: tilt ±180°, rotation increments 2.5°
Scanning speed: up to 150 points/second
Max. stylus length: 150 mm
Max. stylus weight: 15 g
Min. stylus tip diameter: 0.3 mm
Length measurement error (E₀): 1.7 + L/350 µm (at 18–22°C)
Scanning error (THP): 2.7 µm
Form measurement error (RONt): 1.7 µm
Repeatability (R₀): 1.2 µm
Controller: ZEISS C99L
Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS
Control mode: Motorized / CNC
Interface: Ethernet, USB
Drive system: Motorized CNC
Travel speed (axes): 0–70 mm/s
Max. vector speed: 465 mm/s
Max. acceleration: 1.85 m/s²
Power supply: 100–240V AC (±10%), 50–60 Hz
Max. power consumption: 800 VA
Typical power usage: 200 W
Compressed air: 6–8 bar, pre-cleaned, dry (ISO 8573-1 Class 4)
Air consumption: max. 120 Nl/min
Operating temperature: 18°C–22°C
Relative humidity: 30–60% (non-condensing)
Quality management: ISO 9001:2008
Environmental management: ISO 14001:2004
Accredited ISO / IEC 17025: 2005
Additional information
Equipped with vibration damping system
Sensor System
Accuracy (per ISO 10360 standards)
Performance
Scanning speed: up to 125 mm/s
Utilities
Environmental Conditions
Compliance & Certifications
Conforms to EC Machine Directive 2006/42/EC
EMC Directive 2014/30/EU